Command Advancing (Buffer Memory Address 202, 218: Un\G202, Un\G218); Segment Monitor (Buffer Memory Address 256, 512: Un\G256, Un\G512); Segment Remaining Time (Buffer Memory Address 257, 513: Un\G257, Un\G513) - Mitsubishi Q Series User Manual

3 SPECIFICATIONS

3.5.49 Command advancing (buffer memory address 202, 218: Un\G202, Un\G218)

Command advancing
(Buffer memory address: 202, 218)
Advancing completion flag
(Buffer memory address: 263, 519)

3.5.50 Segment monitor (buffer memory address 256, 512: Un\G256, Un\G512)

3.5.51 Segment remaining time (buffer memory address 257, 513: Un\G257, Un\G513)

3 - 85
(1) This is the command of the advancing operation to carry the progress of the
program control forward to the next segment.
• Advancing OFF
• Advancing ON
Set value
Fast-
forward
Segment 1
0
0
(2) The completion confirmation of the advancing operation is performed by the
advancing completion flag (buffer memory address: 263, 519).
(3) This command is invalid at the hold status.
(1) The currently operated segment No. is stored.
The stored values are 1 to 16.
(1) The remaining time of the currently operated segment is stored.
(2) The time scale of the segment remaining time is the scale set by the time scale
(buffer memory address: 274, 530). (Refer to Section 3.5.62)
: Set 0 (default value).
The advancing operation is not performed.
: Set 1.
After performing the advancing operation and carrying the
progress of the program forward by one segment, this
command executes the program from the next segment.
Execute
from here
Command advancing ON
Segment 2 Segment 3
1
1
MELSEC-Q
Time
Segment 4
0
0
3 - 85