Mitsubishi Q Series User Manual page 18

1 GENERAL DESCRIPTION
1 - 4
(12) Online module change function
The Q62HLC can be changed without stopping the system. (Refer to Chapter 7)
(13) FeRAM for backing up set values
The set values in buffer memory can be stored into FeRAM for data backup.
Using the test function of GX Developer to write data directly to the buffer
memory, what is required in a sequence program is "LD
minimum. (Refer to Section 3.2.9)
(14) Utility package for ease of setting
The optional utility package (GX Configurator-TC) is available.
Though you are not required to use the utility package, it allows initial and auto
refresh settings to be made on the screen, reducing sequence programs and
also enabling you to check the setting and operating states and execute auto
tuning easily. (Refer to Chapter 5)
MELSEC-Q
" + "OUT Yn1" at the
1 - 4