Mitsubishi Q Series User Manual page 157

5 UTILITY PACKAGE (GX Configurator-TC)
5 - 23
[Explanation of items]
(1) Items
Setting item : Displays I/O signals and buffer memory names.
Current value : Monitors the I/O signal states and present buffer memory values.
Setting value : Enter or select values to be written into the buffer memory for test
operation.
(2) Command buttons
Current value display
Make text file
Start monitor / Stop monitor
Execute test
Close
REMARK
The "Execute test" operation is explained below, using an example of writing data to
CH.1 set value (SV) setting.
(1) Click and choose the set value field of CH.1 set value (SV) setting.
(2) After entering a value, press the Enter key.
Nothing is written to the Q62HLC at this point.
(3) Click the setting value field for write to the Q62HLC to select.
To write more than one setting item at the same time, select the items while
holding down the Ctrl key.
(4) Click Execute test to execute the write operation.
Upon completion of writing, the written value appears in the current value field.
Displays the current value of the item selected.
(This is used to check the text that cannot be
displayed in the current value field. However, in
this utility package, all items can be displayed in
the display fields).
Creates a file containing the screen data in the
text file format.
Selects whether or not to monitor current
values.
Performs a test on the selected items. To select
more than one item, select them while holding
down the Ctrl key.
Closes the currently open screen and returns to
the previous screen.
MELSEC-Q
5 - 23