D.
Optional Module Installation and
Replacement Instruction
VENUS X2 and VENUS X3 support replaceable input and output optional modules, user
can install or replace the optional module according to actual need. The installation steps
of VENUS X2 and VENUS X3 are the same. Here we take VENUS X3 for example,
specific steps are as follows:
Install the Optional Module
1. Unscrew the 2 captive screws in input modules block, and pull out the input module
block, as shown in figure:
Captive Screw
2. Install the input module:
① For the whole PCB input module with DVI or HDMI interface, fix the input module on
the plate with 2 M3*4 flat screws, also need to install the 2G Micro SD card.
VENUS X2
User Manual
71
Need help?
Do you have a question about the VENUS X2 and is the answer not in the manual?