Speed Control Pedal; Speed Set Lever [Lx2620 Rops Model Only] - Kubota LX2620 Operator's Manual

STARTING THE TRACTOR
[CAB model]
(1) Hand throttle lever

12. Speed control pedal

WARNING
To avoid personal injury or death:
• Do not operate if the tractor moves on level
ground with the operators foot off of the speed
control pedal.
• Contact your local Kubota dealer.
Forward pedal
Depress the speed control pedal with the toe of your
right foot to move forward.
Reverse pedal
Depress the speed control pedal with the heel or toe of
your right foot to move backward.
[ROPS model]
(1) Speed control pedal
LX2620,LX2620SU
(A) Decrease
(B) Increase
(A) "FORWARD"
(B) "REVERSE"
[CAB model]
(1) Speed control pedal
IMPORTANT :
• To prevent serious damage to the HST, do not
adjust the stopper bolts.
NOTE :
When you stand up from the seat with either:
• the speed control pedal stepped on
• the speed set lever engaged (ON) [LX2620
ROPS model only]
• the cruise control lever engaged (ON) [LX2620
CAB model only]
the engine will stop regardless of whether the
tractor is moving or not.
This is because the tractor is equipped with an
operator presence control (OPC) system.
13. Speed set lever [LX2620 ROPS
model only]
WARNING
To avoid personal injury or death:
• Pull the speed set lever completely to the up
position before starting the engine.
• Do not use the speed set lever when driving on
the road.
• Connect both the left and the right brakes to
release the speed set lever. The speed set lever
won't be released with single brake activation.
The speed set lever is designed for tractor operating
efficiency and operator comfort. This device will provide
a constant forward operating speed by mechanically
holding the speed control pedal at a selected position.
To engage speed set lever
1. Accelerate speed to desired level using speed
control pedal, and push the speed set lever down to
the "ON" position.
2. Release speed control pedal and desired speed will
be maintained.
OPERATING THE TRACTOR
(A) "FORWARD"
(B) "REVERSE"
55