Parameters: Pump/Lcd Contrast: Adjust Pump; Parameters: Pump/Lcd Contrast: Adjust Lcd Contrast - Siemens ULTRAMAT 23 Operating Instructions Manual
Gas analyzer for ir-absorbing gases and oxygen
Hide thumbs
Also See for ULTRAMAT 23:
- Manual (244 pages) ,
- Product information (22 pages) ,
- Compact operating instructions (37 pages)
Table of Contents
Advertisement
Operation
5.9.4.1
Parameters: Pump/LCD Contrast: Adjust Pump
Adjust pump/flow
Use
->
to adjust
ENTER: save new val.
ESC: keep old value
5941
5.9.4.2
Parameters: Pump/LCD Contrast: Adjust LCD Contrast
Adjust LCD contrast
Use -> to adjust
ENTER: save new value
ESC : keep old value
5942
5-30
Here you can:
S
Increase the pump capacity using the → or ↑ key
Decrease the pump capacity using the ↓ key
S
S
Store the set pump capacity using the ENTER key
S
Cancel the input using the ESC key.
Changes to the pump capacity are shown on the flowmeter and directly
in the menu display by the message OK or NOK.
Here you can:
S
Increase the contrast using the → or ↑ key (darken the characters)
Decrease the contrast using the ↓ key (brighten the characters)
S
S
Store the set contrast using the ENTER key
S
Cancel the input using the ESC key.
Notice
Press the three keys ↑ , ↓ and → simultaneously to set an average
contrast again.
Operating instructions ULTRAMAT 23 gas analyzer
C79000-B5276-C216-03
Advertisement
Table of Contents
