Approved Use - Siemens ULTRAMAT 23 Operating Instructions Manual
Gas analyzer for ir-absorbing gases and oxygen
Hide thumbs
Also See for ULTRAMAT 23:
- Manual (244 pages) ,
- Product information (22 pages) ,
- Compact operating instructions (37 pages)
Table of Contents
Advertisement
Information for the user
1.4
Approved Use
!
1-4
Approved use in the sense of this instructions means that this product
may only be used for the applications described in the Catalog and in
the Technical Description (see also Chapter 3 of this instructions) and
only in conjunction with other devices and components which have
been recommended or approved of by Siemens.
The product described in this instructions has been developed,
manufactured, tested and documented taking into account the
appropriate safety standards. No danger therefore exists in the normal
case with respect to damage to property or the health of persons if the
handling guidelines and safety information described for configuring,
assembly, approved use and maintenance are observed. This device
has been designed such that safe isolation is guaranteed between the
primary and secondary circuits. Low voltages which are connected
must also be generated using safe isolation.
Correct and safe operation of this analyzer is additionally dependent on
proper transport, storage, installation and assembly, as well as careful
operation and maintenance.
Warning
This analyzer is an electrical unit. Following removal of the housing or
guard, or after opening the system cabinet, certain parts of the
device/system are accessible which may carry dangerous voltages.
Therefore only suitably qualified personnel may work on this device.
These must be thoroughly acquainted with all sources of danger and
the maintenance measures as described in this instructions.
Notice
The desktop version of this analyzer has also been tested according
to the DIN EN 61010-2-081 standard (safety directives for electrical
measuring, control and laboratory devices)
The 19" rack unit of this analyzer has not been tested as a laboratory
device according to the DIN EN 61010-2-081 standard (safety
directives for electrical measuring, control and laboratory devices).
Operating instructions ULTRAMAT 23 Gas Analyzer
C79000-B5276-C216-03
Advertisement
Table of Contents
