General - Siemens ULTRAMAT 23 Operating Instructions Manual

5.1

General

User prompting
_____________________________________________________________________________
ULTRAMAT 23
Example of a display
12345
_____________________________________________________________________________
Operating instructions ULTRAMAT 23 gas analyzer
C79000-B5276-C216-03
The ULTRAMAT 23 has been parameterized and calibrated prior to
delivery. However, a large number of parameters can be subsequently
adapted to specific requirements using menu-based functions.
The following sections provide you with information on the display and
input panel as well as the operating modes. You will learn how to scan
analyzer statuses, how to calibrate the analyzer, and how you can
enter or modify parameters.
The input sequences are described using the maximum configuration.
If your analyzer has a different configuration (different measured
components, number of infrared ranges, no oxygen measuring cell, no
pump, no serial interface etc.), the explanations can be applied
accordingly.
The used numbers must be considered as examples. They therefore
probably differ from the values displayed on your analyzer. The
corresponding line remains empty if components are not present in
your analyzer.
In the next sections, operation of the ULTRAMAT 23 is explained
according to the following scheme:
Example menu 1: Example menu 2: Example menu 3
Example text.
Cross-reference.
The heading of the respective section indicates the complete menu
path, starting from the main menu, on which the shown display can be
reached (see Section 5.2). The various menu levels are separated from
one another by colons.
The display, as it appears on the analyzer, is shown to the left of the
text. The accompanying text explains the display, including inputs and
instructions if necessary, e.g.:
S
You can start the function using the ENTER key
S
You can terminate the function using the ESC key
You can recognize the position of the cursor in the display in these
instructions in that the corresponding character is printed in bold type
and underlined (in this display: Example).
Operation
5-3