Siemens ULTRAMAT 23 Operating Instructions Manual page 61

Choose component
: CO 3
Switch ranges CO Switch ranges CO
Change ranges CO
Hysteresis CO
Switch ranges CO
Actual range :1
3
MR 1:0. 250 mg/m
3
MR 2:0.1250 mg/m
Save changes?
(choose with -> )
: continue
Save changes?
(choose with -> )
: Yes, go to meas.
Save changes?
(choose with -> )
: No, go to meas.
Operating instructions ULTRAMAT 23 gas analyzer
C79000-B5276-C216-03
S
If your analyzer is configured accordingly, you can select another
component by pressing one of the ↑ or ↓ keys, e.g. component 3 in
this case.
S
Press the ENTER key. The analyzer offers further menu items
which you can select by pressing one of the ↑ and ↓ keys.
S
Branch to the selected function by pressing the ENTER key.
In this example, the adjacent display appears following selection of the
function "Switch ranges CO". The first line contains the heading, the
second line the parameter and its value to be changed; the cursor is
positioned in this line. Only supplementary information is present in
lines 3 and 4. To switch over the measuring range, proceed as follows:
S
Press the ENTER key.
S
The cursor jumps to the measuring range number which you can
change using one of the ↑ and ↓ keys.
S
The range definition is imported when you press the ENTER key
again, and you return to the start of the line.
You cannot carry out any further settings here. To do so, you must
leave the menu display again. This is possible:
S
By pressing the ESC key, you then return by one step in the menu
sequence
S
By pressing the MEAS key. You then have the following
possibilities:
To process the previous menu item further using ENTER,
or return to measuring mode using ↑ or → and ENTER, where all
modifications are imported which you have made since the last
decoding operation,
or return to measuring mode using ↓ and ENTER without importing
the modifications.
Once you have carried out the above sequence on the analyzer, you
are already acquainted with a number of important points for operation
of the ULTRAMAT 23.
Operation
5-11