Standards And Regulations; Conformity With European Guidelines - Siemens ULTRAMAT 23 Operating Instructions Manual

Information for the user
1.8

Standards and Regulations

1.9

Conformity with European Guidelines

CE
symbol
EMC guideline
Low voltage
guideline
Declaration of
conformity
1-6
The harmonized European standards have been applied as far as
possible to the specification and production of this device. If no
harmonized European standards have been applied, the standards and
regulations for the Federal Republic of Germany apply (see also the
technical data in Chapter 3).
When using this product outside the range of applicability of these
standards and regulations, the appropriate standards and regulations in
the country of use must be observed.
The ULTRAMAT 23 gas analyzer complies with the requirements of the
EU guideline 89/336/EEC "Electromagnetic compatibility". Observation
of this EU guideline has been checked according to
DIN EN 61326-1 2006.
The ULTRAMAT 23 gas analyzer complies with the requirements of the
EU guideline 72/23/EEC "Low-voltage guideline". Observation of this
EU guideline is checked according to DIN EN 61010-1.
In line with the above-mentioned EU guidelines, the EU declarations of
conformity are available at the following address for inspection by
appropriate authorities:
Siemens Aktiengesellschaft
Automation and Drives Group
I IA SC PA
Östliche Rheinbrückenstraße 50
D-76187 Karlsruhe
Germany
Operating instructions ULTRAMAT 23 Gas Analyzer
C79000-B5276-C216-03