Qualified Personnel; Warranty Information; Supply And Delivery - Siemens ULTRAMAT 23 Operating Instructions Manual

1.5

Qualified Personnel

1.6

Warranty Information

1.7

Supply and Delivery

Operating instructions ULTRAMAT 23 Gas Analyzer
C79000-B5276-C216-03
Severe personal injury and/or extensive damage to property may occur
following unqualified work on the device/system or the failure to
observe the warnings described in the instructions or on the
device/system cabinet. Therefore only suitably qualified personnel may
work on this device/system.
Qualified persons in the sense of the safety information present in this
instructions or on the product itself are persons who
S
are either familiar as configuring engineers with the safety concepts
of automation technology
S
or have been trained as operators in the use of automation
technology equipment and are acquainted with the contents of this
instructions which refer to operation
S
or have been appropriately trained as commissioning and/or
maintenance personnel for such automation technology equipment
or are authorized to energize, ground and tag circuits and
devices/systems in accordance with established safety practices.
Your attention is drawn to the fact that the contents of this instructions
are not part of a previous or existing agreement, commitment or
statutory right and do not change these. All commitments on the part of
Siemens are contained in the respective sales contract which also
contains the complete and solely applicable warranty conditions. These
warranty conditions in the contract are neither extended nor limited by
the contents of this instructions.
The respective scope of delivery according to the valid contract is listed
on the shipping documents accompanying the delivery.
When opening the packaging, please observe the corresponding
information on the packaging material. Check that the delivery is
complete and undamaged. In particular, compare the Order Nos. on
the rating plates (if present) with the ordering data.
Please retain the packaging material if possible so that you can reuse it
if it is necessary to return the device. A form for this purpose can be
found in Chapter 9.1.
Information for the user
1-5