Panasonic KX-TDA30 Features Manual page 110

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA30:
Table of Contents

Advertisement

1.8 Toll Restriction (TRS)/Call Barring (Barring) Features
KEEP THE SOFTWARE UP-TO-DATE WITH THE LATEST DATA.
A COS should be assigned for each extension. (→ Class of Service [602])
TRS/Barring checks are applied to the following:
ARS
Trunk Access (Idle Line/Trunk Group/S-CO Line)
It is programmable whether " " or "#" is checked by the TRS/Barring. This is useful in preventing
unauthorised calls which could be possible through certain telephone company exchanges.
It is programmable whether TRS/Barring checks the digits dialled after the External Feature Access
during a trunk call. (→ 1.10.7 External Feature Access (EFA))
Host PBX Access Code/Special Carrier Access Code
TRS/Barring checks for numbers dialled with a Host PBX Access code (→ 1.5.4.8 Host PBX Access
Code (Access Code to the Telephone Company from a Host PBX)) or a Special Carrier Access code
(→ 1.5.4.9 Special Carrier Access Code) in the following cases:
Host PBX Access Code
Special Carrier Access
Code
ARS
If ARS is applied to a dialled number, TRS/Barring will check the user-dialled number (not the modified
number by ARS). In this case, a Host PBX Access code and/or a Special Carrier Access code will not
be checked.
Dialling Digit Restriction during Conversation
The dialling of digits can be restricted while engaged on a received trunk call. If the number of dialled
digits exceeds the preprogrammed limitation, the line will be disconnected.
It is possible to select through system programming whether the trunk is disconnected when the Inter-
digit time expires without the TRS/Barring check being completed.
If no disconnection is chosen, the TRS/Barring check will also be performed after the Inter-digit
time expires.
If disconnection is chosen, the line will be disconnected when the trunk Inter-digit time expires. This
also prevents EFA from being used.
This setting applies to all trunks.
A TRS/Barring level can be changed by some features. The priority of features, when multiple features
are used, is as follows:
1)
Dial Tone Transfer (→ 1.8.4 Dial Tone Transfer)
2)
Budget Management (→ 1.8.2 Budget Management)
3)
TRS/Barring Override by System Speed Dialling
4)
Walking COS/Verified Code Entry
(→ 1.8.5 Walking COS, 1.8.6 Verified Code Entry)
5)
Extension Lock
110
Feature Guide
Type
Deletes the code. A
TRS/Barring check is
carried out on the
following digits.
Deletes the code. A
TRS/Barring check is
carried out on the
following digits.
Stored
Found
The call is made
(excepted from TRS/
Barring).
TRS/Barring checks
the whole number.
Not found
TRS/Barring checks
the whole number.
TRS/Barring checks
the whole number.
Not stored

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda100Kx-tda200

Table of Contents