Panasonic KX-TDA30 Features Manual page 138

1.12 Holding Features
Mode 2
(Default)
Mode 3
Mode 4
If the following occurs frequently with an SLT, choose "Mode 2", "Mode 3", or "Mode 4":
a)
When an SLT user receives a call, reorder tone is heard or nobody answers the call.
b)
When an SLT user goes off-hook, reorder tone is heard instead of a dial tone.
If a call is not terminated after going on-hook, the above cases occur. To avoid these problems, choose
"Mode 2", "Mode 3", or "Mode 4". Every call will be terminated unless the Hold feature number is
entered after flashing the hookswitch in Mode 2, Mode 3, and Mode 4.
• Hold Alarm tone pattern has a default. (→ 4.2.1 Tones/Ring Tones).
User Manual References
1.4.2 Holding a Call
138 Feature Guide
Hold
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Transfer to Trunk
Flashing the hookswitch
+
Trunk Access No.
Flashing the hookswitch
+
Hold Feature No.
+
Trunk Access No.
Flashing the hookswitch
+
Hold Feature No.
+
Trunk Access No.
Transfer to Extension
Flashing the hookswitch
+
Extension No.
Flashing the hookswitch
+
Extension No.
Flashing the hookswitch
+
Hold Feature No.
+
Extension No.