Ip Proprietary Telephone (Ip-Pt) Features (Kx-Tda100/Kx-Tda200 Only); Ip Proprietary Telephone (Ip-Pt) (Kx-Tda100/Kx-Tda200 Only) - Panasonic KX-TDA30 Features Manual

1.30 IP Proprietary Telephone (IP-PT) Features (KX-TDA100/KX-TDA200 only)

1.30 IP Proprietary Telephone (IP-PT) Features (KX-
TDA100/KX-TDA200 only)
1.30.1 IP Proprietary Telephone (IP-PT) (KX-TDA100/KX-TDA200
only)
Description
This PBX supports the connection of IP proprietary telephones (IP-PTs), which function almost identically
to normal PTs. However, they connect to the PBX over a Local Area Network (LAN), and send and receive
calls using Internet Protocol (IP).
IP-PTs have two Ethernet ports for connection, primary and secondary. They are connected to the PBX
through a network hub or other splitting device, and can have a PC connected to the secondary Ethernet
port.
[Connection Example]
PBX
IP-EXT
Main Office
Conditions
• Hardware Requirement: An IP-EXT card
• IP-PT registration is required through system programming before an IP-PT can be used with the PBX.
An IP-PT cannot be used unless an extension number is assigned. For details on how to register IP-
PTs, see the Installation Manual.
• The following features cannot be used with an IP-PT:
– XDP (→ 1.10.9 Parallelled Telephone)
– Digital XDP (→ 1.10.9 Parallelled Telephone)
– OHCA (→ 1.7.4.3 Off-hook Call Announcement (OHCA))
– Walking Extension (→ 1.27.3 Walking Extension)
– Using PC Phone or PC Console on a connected PC
Installation Manual References
2.5.8 IP-EXT16 Card
294 Feature Guide
Private IP
Network
IP-PT
Primary Secondary
Ethernet Port
Ethernet Port
IP-PT
PC
IP-PT
Branch Office