Panasonic KX-TDA30 Features Manual page 57

Parameter
(All)
• If an ICD Group button is assigned, it also shows the log-in/log-out status of the corresponding group.
The light pattern is the same as the Log-in/Log-out button that includes the group number.
• Wrap-up Button
A flexible button can be customised as the Wrap-up button. It shows the current status as follows:
Light pattern
Slow red flashing
Red on
Off
• When a PS in Wireless XDP Parallel Mode completes a call, neither the PS nor its wired telephone can
have Wrap-up time. (→ 1.24.5 Wireless XDP Parallel Mode)
• Automatic Log-out
A member extension may be logged out automatically, if the Unanswered time expires a
preprogrammed number of times consecutively. The number of consecutive unanswered calls can be
assigned for each incoming call distribution group. If the extension is a member of more than one
incoming call distribution group, the unanswered number is counted across all corresponding incoming
call distribution groups. It is possible to return to log-in mode manually.
The Automatic Log-out feature does not work for extensions in an incoming call distribution group using
the Ring distribution method (→ 1.2.2.2 Group Call Distribution).
• Log-in/Log-out Monitor
The supervisor extension can monitor and control the log-in/log-out status of the incoming call
distribution group members. (→ 1.2.2.7 Supervisory Feature)
• Log-in/Log-out Information on SMDR
Log-in/Log-out information can be printed out on SMDR. (→ 1.25.1 Station Message Detail Recording
(SMDR))
Feature Guide References
1.19.2 Flexible Buttons
User Manual References
1.8.1 Leaving an Incoming Call Distribution Group (Log-in/Log-out, Wrap-up)
Usage
Used to log in to or out of all incoming
call distribution groups to which the
extension user belongs.
Wrap-up
Not Ready
Ready (Wrap-up mode cancel)
1.2 Receiving Group Features
Light Pattern
Red on
After Log-out
Operation
Status
Feature Guide
Off
After Log-in
Operation
57