Tenant Service - Panasonic KX-TDA30 Features Manual

2.2.3

Tenant Service

Description
This PBX can be shared with certain number of tenants.
1.
Tenant Configuration
1.1
Tenant Member
The tenant members consist of user groups. One user group can belong to only one tenant.
Therefore, one extension can belong to only one tenant.
(→ 2.2.2 Group)
1.2
Time Service
Each tenant has a Time Table. The Start and/or End time of each time mode (day/lunch/break/
night) can be set for each day of the week. The Time Table numbers correspond to the tenant
numbers respectively.
(→ 2.2.4 Time Service)
[Example]
Tenant 1
User Group 1
User Group 2
User Group 3
User Group 4
Use Time Table 1
2.
System Management
Each of the following system management items can be assigned to each tenant.
a)
Tenant Operator (extension number/floating extension number of incoming call distribution
group/none) (→ 2.2.5 Operator Features)
b)
ARS Mode (Off/Local Access/All Access/System) (→ 1.9.1 Automatic Route Selection (ARS))
c)
Music Source for Music on Hold (System/BGM Number/Cyclic Tone)
(→ 1.12.4 Music on Hold)
[Programming Example]
Tenant No.
1
2
3
:
*1 : Follows the system assignment of a PBX operator (→ Operator Assignment [006])
*2 : Follows the system assignment of the ARS mode (→ ARS Mode [320])
Tenant 2
User Group 5
User Group 6
Use Time Table 2
Operator
Extn.101
None *1
Floating extn. no. 200
:
2.2 System Configuration—Software
ARS Mode
Local Access
System *2
Off
:
Music Source
*3
System
Cyclic Tone
BGM1
:
Feature Guide 305