Qsig Network; Qsig Network-Summary - Panasonic KX-TDA30 Features Manual

1.29 Networking Features

1.29.3 QSIG Network

1.29.3.1 QSIG Network—SUMMARY
Description
QSIG is a protocol which is based on ISDN (Q.931) and offers enhanced PBX features in a private network.
The QSIG network supports private communications by the TIE line service method.
Each ISDN (QSIG) connection must have a master port on one Panasonic Hybrid IP-PBX and a slave port
on the other Panasonic Hybrid IP-PBX to establish a QSIG network.
[Connection Example]
Extn.1000
:
Extn.1999
System programming controls the following services individually for each ISDN (QSIG) port.
[Service Table]
Service
Calling Line Identification
Presentation (CLIP)
Connected Line Identification
Presentation (COLP)
Calling Line Identification
Restriction (CLIR)
278 Feature Guide
PBX-1
(A) Master
QSIG Network
(B) Master
(B) Slave
PBX-3
Sends the caller's number to the QSIG network when making a call.
→ 1.29.3.2 Calling/Connected Line Identification Presentation (CLIP/
COLP) and Calling/Connected Name Identification Presentation
(CNIP/CONP)—by QSIG
Sends the number of the answered party to the QSIG network when
answering a call.
→ 1.29.3.2 Calling/Connected Line Identification Presentation (CLIP/
COLP) and Calling/Connected Name Identification Presentation
(CNIP/CONP)—by QSIG
Prevents the caller's CLI being presented to the called party by the
caller.
→ 1.29.3.2 Calling/Connected Line Identification Presentation (CLIP/
COLP) and Calling/Connected Name Identification Presentation
(CNIP/CONP)—by QSIG
PBX-2
(A) Slave
(C) Slave
(C) Master
Extn. 3000
:
Extn. 3999
Description & Reference
Extn. 2000
:
Extn. 2999