Editing The Master-Keyboard Programs - Quasimidi CYBER-6 Manual

Organisation of the MIDI-channels
masterkeyboard-programs with motivator-programs without having conflicts with the midi-channels.
Following table shows the assignment of the midi-channels in our example-programs:
MIDI-channels ->
Synthesizer
QUASAR
TECHNOX
GM-kompatible
The first eight midi-channels are used by the motivators. The following 3 - 4 midi-channels for the sequencer
further 4 - 5 for masterkeyboard-programs. Using only one midi-out there are totally 16 channels at your
disposal. Using also midi-channel B you will get 16 channels in addition.
Now you will learn to make masterkeyboard-programs by yourself. To get an impression of all possibili-
editing the master-
keyboard pro- ties please pay attention to following table:
grams
Zone-parameters: This parameters can be
tuned seperately for each keyboard-zone.
Every keyboard zone has its own
midi-channel, program change etc. Further,
you can decide for every keyboard-zone,
which kind of midi-data will be send, when
the realtime-controls are used.
This parameters have an effect for the whole
masterkeyboardprogramm. So you can not
change these values for individual zones.
Here you fix the functions of realtime
controls, assign sequencers and
motivator-tunings to masterkeyboard-
programs and decide between internal and
external synchronisation. The finished
program can stored in this menus.
A01 A02 A03 A04 A05 A06 A07 A08 A09 A10 A11 A12 A13 A14 A15 A16
MIDI-channels as used by: K = masterkeyboard, M1 = motivator 1,
M2 = motivator 2, S = sequencer
M1 M1 M1 M1 M2
M1 M1 M1 M1 M2
M1 M1 M1 M1 M2
K* = MIDI-channels be used by Quasar Performance
Page
1
2
3
4
5 bis 8
9
10 bis 13
14 bis 15
16
17 bis 18
18
19
20
M2 M2 S S S
M2 M2 M2 S S
M2 M2 M2 S S
Menue-Contents
midi-channel and keyboard-zone
play-mode and global zone-parameters
volume, bank- und program changes
transposition and footswitch On/Off
controller on/off and polarity
motivator zone-assignment
controller definition
motivator: realtime controller assignment
selection of sequence, tempo, Start-Mode
sequencer: realtime-controller sssignment
synchronisation und trigger-options
choice of name
save procedure
S K K* K* K*
S S K K K
S S K K K
K*
K
K
11