Table of Contents
Advertisement
Chain delete/ Motivator Freeze Function
Now have learned how to program a new chain. Now you will learn the opposite of chain-programming:
Chain deleting! The chain-delete function is at the page 2 of the main menu of the cyber. Select this page
with the page-dial:
Choose the chain you want to delete using the + / - buttons or by entering a two-digit number. Confirm
your choice by pressing [ENTER]. Now move the cursor to DEL option and press [ENTER] again. An-
other sub menu should appear:
With the + /- buttons you can choose either to delete the chain including all patterns used with this chain
(the CYBER-6 automatically excludes those used by other chains from deletion) or
to delete only the chain and leave the patterns alone. Confirm with [ENTER] or abort with [EXIT]. Guess
you knew that. Confirm with [ENTER] or abort with [EXIT]. Guess you knew that.
The motivator-
Like the chain-mode also the motivator-freeze function is another highlight for live-performance of the
freeze-funktion.
CYBER-6. With the freeze-function you can hold a running motivator-sequence with a footswitch. The
keyboard zone, which was controlling the motivator transposes this freezed motiv during you hold the
footswitch down. The motivator-freeze function is only available at the footswitch 2. So you have to
connect a footswitch to the footswitch 2 jack to use the new function. Further you have to activate this
function at page 4 of the main-menu. You can choose page 4 with the page-dial. The following display-
message appears:
With the "+/-"-buttons you can now select the motivator-freeze-function. The freeze function disables
assignements you have made in the masterkeyboard-program for footswitch 2. The freeze function works
with both motivators at the same time. If you used 2 different keyboard-zones for the motivator control,
you can transpose the freezed motiv at both keyboard-zones.
50
<2>
11111111
Chain: 1 Step: 2 Bars: 0
REALLY DELETE Chain
i n c l . P A t t e r n s
REALLY DELETE Chain
only Chain
< 4> CYBER-6
Footswitch2 Function: Masterkeyb
(MKB:
1 PAT: 1
1?
1?
)
DEL
EDIT
Advertisement
Table of Contents
