Modulation of the sequencer
Inverting the effects of the modulation
But with it the real-time-modulations of the motivator-sequences are not yet exhausted. Of course you can
program a masterkeyboard-zone, which sends controllers only on one MIDI-channel which is used by the
motivator. The status of this masterkeyboard-zone should be set to "Control-Only" so that no notes are
sent from this zone. The same opportunity is implemented for the sequencer-tracks.
Modulation of the
The modulation-sources for the realtime-modulation of the sequences are selected on the pages 16 and 17
sequencer
of the menu. Concerning the realtime-modulation of the sequences we have created something very spe-
cial. Mostly you will determine the desired modulation already at the programming of the sequences and
try it out then. As the 8 tracks of the sequencer according to the patterns will have a fully different con-
struction, it is more meaningful to make the selections there. In the masterkeyboard-programs the modula-
tion-sources determined in the sequencer are simply associated to the regulators. In this way you can
change the sequences at retention of a masterkeyboard-program without losing the desired realtime-con-
trol. The three modulation-targets determined in the sequencer are marked with SEQ-Mod 1 - 3. The
regulators/modulation-sources can be associated to these three targets. Concerning this read also the chap-
ter: "realtime-control of sequencer-tracks" on page 39.
The determination is done in the submenus 16 and 17 of the masterkeyboard-edit-area :
The second line of the display still is of no interest, you can find further details in the following sector.
desired modulation
selection of modulation-sources for realtime
sequencer-modulation
Inversion of the effect of the modulation
24
Invert
<16>
SEQ-Mod1:
SEQ-MOD2:
<17>
SEQ-Mod3:
MOT1-Trigger: int
parameter
SEQ-Mod
1-3
Invert
If several parameters should be controlled by one
modulation-source it may be meaningful to invert
the effect of the regulators. Turning up the
regulator causes a lowering of the intensity of the
modulation. If the inversion is activated for one
of the motivators and switched off for the second
one, one can lengthen the gate-time of the first
motivator while the gate-time of the second one is
shortened.
OFF Invert:OFF
OFF Invert:OFF
OFF Invert:OFF
MOT2-Trigger: int
operation/explanation
With this parameter you choose, which
modulation-source controls the
sequencer-modulation.
If a regulator controls several parameters at one
time it can be meaningful to invert the effect of the
regulator. Turning up the regulator then causes a
lowering of the intensity of the modulation. If the
inversion is activated for one sequencer-track and
switched off for another track, the filter of the first
track can be opened while the filter of the second
track is closed.