Exercise 1; Playing Of Example-Programs - Quasimidi CYBER-6 Manual

Basic Operation
Synthesizers and expanders wich are controlled by midi-channels B1 - B16 are connected tomidi out B
jack. Due to this second midi output Cyber 6 can manage 32 midi-channels. Connect midi outputs with the
midi inputs of your synthesizers, expanders and midicontrollable effect-units.
The MID-Input jack is internally connected to the MIDI-thru jack. If you want to connect a midi-source to
the CYBER-6 and another midi-device, you can connect the other device with the midi-thru jack. It gets
the same data like the CYBER-6. On this jack Cyber 6 does not send any own data. However, if more than
five MIDI-devices are connected in a thru line, data might be lost during midi transmission.
Midi-channels A1 to A16 are situated at the "midi out A" - jack. Synthesizers which are to be controlled by
these channels correspondently to be connected with their midi-input to this jack.
The "midi-in" - jack is responsible for receiving midi-data. This Cyber 6 midi-input is only being used for
receiving tempo-informations and data exchange with other midi-devices (system-exclusive-data). CYBER-
6 offers also a soft-thru-function for sysex-data of other midi-devices. From a data-filer you can transmit
midi-data to devices, which are connected with the midi-output of the CYBER-6.
You have learnedhow to use the keyboard and how to connect it. Now we would like to give you an

Exercise 1:

Playing of exam- example. For immidiate use of Cyber 6, we have programmed 30 masterkeyboard- programs through wich
ple-programs you will get to know the different kinds of utilization. As we do not know what kind of equipment you are
going to use, we have split up our masterkeyboard-programs into three sections:
The first ten programs 01 - 10 have exclusivly been programmed for the Quasar. For a proper performance
Quasar should be set to performance and multichannel operation. Tune the master channel to 13.
The next ten programs 11 - 20 have been programmed for Technox. In order to hear them according to our
programming, Technox must be set to the sequencer-mode.
Costumers who don´t have a quasimidi synthesizer but a general-midi-device can try out program 21 - 30
wich are GM compatible. Thus they can be used alongside any GM compatible midi expander or synthe-
sizer. Quasar users can use both first 10 programs as well as 21 - 30. Nevertheless, when using the GM-
programs, Quasar should be set to GM mode in order to ensure a proper function.
We have only used the midi-channels 1 to 16. So you have to connect the midi-output "A" of the CYBER-
6 with the midi-Input of youre soundsource. The expander or synthesizer must certainly be connected to an
amplifier.
Connecting plan:
8
to amplifier