Editing Of The Single-Sounds - Quasimidi Technox Owner's Manual

7.) Editing of the single-sounds

Coming from the main-page you have to press the "EDIT/OK" key to enter the edit menu. By Using the
two alpha-dials you can reach the sub-menu to edit a part:
Press "Edit/OK" once more and the display changes to:
With the "Parameter/Soundgroup"-dial you may step through the following menu-pages. If you like to
listen to the changes immediately you first have to select the part corresponding to the send-channel of
your connected keyboard.
<1>
<2>
<3>
<4>
<5>
<6>
<7>
<8>
<9>
Here you see the different panorama-positions and effects, which Technox offers in the part-edit menu.
Panorama:---
Panorama:L<7-R>7
Panorama:RND
Panorama:key\or\yek
Panorama:dyn\or\nyd
10
Edit/Function
<2> Edit Part
Part 1
|1>
To accelerate the search for a specific sound, all sounds are divided into groups.
Part\13\SndGroup
With the "VALUE"-dial the groups can be selected.
|1>\SynthLead
On the second parameter-page you can select the single-sounds directly. Reaching
Part\13\Sound
the last sound of a group and going on automatically swaps to the next group.
<2>\_303Lead
With this parameter you decide how a sound is played. The both monophonic
Part\13\_303Lead
modes allow the use of portamento. They simulate the single-trigger playing like
<3>\Mode:\\\\\On
the old analog synth of former days. The envelopes are triggered only if the
previous key is released. The following modes are available:
Mode: OFF- the part is disabled
Mode ON- the selected part can be played polyphonic.
Mode: MONO- the part can be played only monophonic. The highest note has
priority when pressing more than one key.
Mode: LEAD- the part can be played only monophonic. The last note has priority
when pressing more than one key.
With this parameter you can regulate the volume of the chosen part.
Part\13\_303Lead
<4>\Level:\\\127
With this parameter the part can be placed in panorama. The different types and
Part\13\_303Lead
effects of the panorama are shown later on this page.
<5>\Panorama:___
The send-level of the part-signal that is sent to the effect processor 1 (FX1) can be
Part\13\_303Lead
selected in this menu.
<6>\FX1-Send:\\0
The send-level of the part-signal that is sent to the effect processor 2 (FX2) can be
Part\13\_303Lead
selected in this menu.
<7>\FX2-Send:\63
Each part can be tuned individually. Here you can change the coarse-tune in
Part\13\_303Lead
semi-tones.
<8>\CoarseT:\-12
Each part can be tuned individually. Here you can change the fine-tune e.g. for
Part\13\_303Lead
detune-effects between two simultaneously playing parts to make a sound more
<9>\FineTune:\+0
fat. Warm and full sounds are the result.
At this value, the signal can only pass the output through the FX-processors.
Different absolute positions are selectable between left and right.
Random-Panorama - every new note has another pan-position
The pan-position is controlled by the keynumber of the played note.
The pan-position is controlled by the dynamics (Key-velocity)
SndGroup
SynthLead
QUASIMIDI STYLEDRIVE FANSEITE
http://people.freenet.de/styledrive/