Table of Contents
Advertisement
basics of the CYBER-6 sequencer
basics of the
In addition to the motivators the CYBER-6 contains an 8-track-sequencer with a lot of extraordinary
CYBER-6
features:
sequencer
The sequencer of the CYBER-6 has been optimized in a way, that all sorts of modern electronic-music,
from TECHNO to AMBIENT and from Berlin to Dusseldorf can be realized and produced in a totally new
and innovative manner. The Snapshot-function helps to copy motifs from the motivator directly into the
memory of the sequencer for a quick conservation or a further arrangement.
pattern-oriented
For playing in your own sequences please use the "EDIT-SEQ"-button at the top right. If you have already
parameters
used this menu, please turn the alpha-dial until you reach the first edit-page. The following message should
be achieved on the display:
The following parameters are to be found on this page of the display:
desired operation
Selecting a pattern
Erasing a pattern
Setting the speed
34
1.) Drum-programmer as found in elder drum-machines like Roland TR-808 or TR-909.
2.) Realtime-control of mutings and transposes by using the keyboard.
3.) Direct changes of the song-structure even in live-acts.
4.) Track-oriented realtime-modulations that can be assigned to any modulation-source in a
masterkeyboard-program.
5.) Adjustable groove-algorithms, especially for any kind of House or Rap.
6.) Intelligent input-support that even allows a seperat input of notes and rhythm of sequences. This
allows to play-in very complex sequences without having to look after the playing-capabilities.
7.) Simple loop-adaption within the patterns that allows a quick and efficient work.
8.) A converter-program for the conversion of Standard-MIDI-Files into the CYBER-6-formate al
lows to accept sequences from other basis.
9.) Recording of any controller-data into the sequencer, e.g. generated from the modulation-sources/
regulators of the CYBER-6.
|1> SEQUENCER
Pat: 1 CLEAR
Speed:120
Groove:16
name
description/explanation
Pat
The sequencer of the CYBER-6 works
pattern-oriented, up to 99 Patterns can be stored
and managed in the CYBER-6. Unused patterns
are indicated with an asterisk behind the number
of the pattern. The selection of a pattern has to be
confirmed by pressing the "ENTER"-key. In this
way you can choose apattern while the sequencer
continues to play the actually selected pattern. If
you choose an empty pattern you find another
sub-menu on the display, where you have to
choose the type of measure.
CLEAR
If you move the cursor to this parameter on the
display and confirm with the "ENTER"-button,
the actually selected pattern is erased completely,
but before that you have to confirm for a second
time.
Speed
The speed can be set directly by using the
number-buttons or with the "+/-"-buttons. The
speed is not stored in the patterns. In the
chain-mode a speed for each song can be set. This
speed is valid for the motivators and the patterns
called up by the chain.
0
Advertisement
Table of Contents
