Recording Of Other Controller; Realtimecontrol Of Sequenzer Tracks - Quasimidi CYBER-6 Manual

realtime control of sequencer tracks
recording of other The CYBER-6 sequencer allow the recording of MIDI-controller. In the overdub-recording-mode is it
controller possible to record MIDI-controller on a exist track. Now you can concentrat to play the bass line or melody
and after this you can record the MIDI-controller. Some of the importantly MIDI-controller are fixed on
some controller (e.g. pitch-wheel). You have also the possibilty to give any MIDI-controller to the other
controller (e.g Wheel 2).The following table shows you the assignment of MIDI-controller to the hard-
ware-controller.
Controller
Pitch-Bend
Wheel 1
Wheel 2
Aftertouch
Control 1-3
You can change the function of the control 1-3 in the sequenzer-edit-menue 7and 8. For every pattern ....
SeqMod 1-3 are fixed on control 1-3. You can record this MIDI-controller additional to the other controller
(e.g. Pitch-bend). The parameter "Track" has no function in this mode. The parameter "Track" is impor-
tant for the assignment of realtime-modulation in the play-mode only.
Realtimecontrol
On the pages 7 and 8 in the Sequenzer-Edit-Mode you can make other adjustments. These adjustments
of sequenzer
have effect on the realtime modulation of previously played in sequencer tracks
tracks
via masterkeyboard-programs.As you could already see editing the masterkeyboard programs, the three
42
MIDI-Con exception feature/statement
Pitch-Bend
Modulation With this controller you sen the MIDI-controller 1 :
Velocity
Aftertouch
programabl The controller 1-3 can send any
<7> SeqMod1: Control 12
SeqMod2:
<8> SeqMod3: Control 14
This controller isn´t a MIDI-controller real. That
doesen´t matter for the user. In any case you can
pitch your melody.
Modulation
With this controller you can change the velocity
later. This controller are record in the
dynamic-mode only. This function is perfect for
sounds, which velocity is assigned to the
cutoff-frequence.In this way you can record
changes of timbre without unnecessarily using up
the CYBER-6s memory with MIDI-controller data.
Assigned to channel-aftertouch. If you want to
record the aftertouch-dates, use teh hardware
controller Controll 1-3.
MIDI-controller-date. You can change the
assignment for every pattern. You have also the
possibilty to assigned aftertouch to control 1-3
Track: 1
Control 13 Track:
Track: 3
2