How To Trigger Motivators From The Sequencer - Quasimidi CYBER-6 Manual

How to trigger the motivators from the sequencer
If no modulation-source was programmed in the sequencer-patterns, the determination of the regulator
still shows no effect. Therefore, if desired, you can control one totally different parameter for each pattern.
How to trigger
Also this submenu mainly is thought for advanced users who already have gotten to know the sequencer
motivators from
and motivator. With the help of this function the rhythm of a freely selectable sequencer-track of the
the sequencer
currently running pattern can be used for the rhythmical adaption of the motivator, for example you can
transfer the rhythm of a hihat-track directly to the gater (the gater is an element of the motivator and can be
used among other things to chop a synth-pad rhythmically). So depending on a selected pattern the rhythm
of the
motivator changes. A truly marvellous feature which saves the tormented Techno-producer some work.
The triggering of the motivators occurs differently, depending on the selected mode of the motivator:
selected operation
arpeggiator-mode
gater-mode
chord-play
The selection of the sequencer-tracks that shall trigger the motivators is performed in the submenu 17 of
the masterkeyboard-edit-area, the accompanying display looks as follows:
In this context only the second display-line is of any interest. For each motivator one of the 8 sequencer-
tracks can be chosen. In the position "INT" the motivators work (without being triggered externally)
within the discontinued speed and their own rhythmic-scheme.
name
Arpeg
gater
chord
<17> SEQ-Mod3:
MOT1-Trigger: int
different trigger-modes
The trigger-notes of the sequencer change the the
step-pointer of the rhythm-grid. When all steps in
the grid have been activated, the resulting
rhythm-scheme is equal to the rhythm of the
sequencer. But if in contrast to that not all steps are
activated this causes an alteration in the rhythm.
The rhythm may change permanently due to a
different number of beats in the sequence and in
the groove of the motivator so that it takes many
run-throughs up to the first repetition. A
marvellous feature for all friends of algorithmic
composing!
Here the definitions in the rhythm-grid have no
meaning anymore for the resulting groove, it
depends exclusively on the sequencer-track that
has been selected for the triggering.
Works equal to the arpeggiator-mode.
OFF Invert:OFF
MOT2-Trigger: int
25