Table of Contents
Advertisement
Realtime-recording
Realtime Record-
Now let´s come to an almost acrobatic part of the sequencer-editing - the realtime-recording! Even today
ing
it is an always very favourite feature to play-in notes into the sequencer in realtime. Although it sometimes
may seem a little bit antiquated or outdated today, we have implemented this feature in the CYBER-6. Call
up page 5 in the display to get to the recording-window for realtime-recordings:
The parameters "Undo" and "Quantize" indicated on the display are of a great importance in this record-
ing-mode.
desired operation
starting the recording and changing the
method of recording between "NORMAL"
(erases all that has been played in before and
starts a new recording) and "OVERDUB"
(adding something to the recordings done
before). Besides that another special
recording-mode can be chosen for a
subsequent treatment of the dynamic with
the help of the "Wheel 2".
Cancelling an operation
subsequently improving the timing
Indicating the remaining memory
The "INFO"-button has another function in the sequencer-edit-area: You can switch the just se-
lected track to "Solo". So you have an optimal control of the just played-in tracks.
38
< 5) SEQUENCER-Record
Record: Normal
name
Record
Undo
Quantize
Mem
Track:
Undo
Quantize:16 Mem109
description / explanation
Pressing the "ENTER"-button starts a pre-counting
signal for the length of one bar, then the recording
begins. Before starting the recording-session you
can switch the recording-mode with the
"+/-"-buttons between "NORMAL" and
"OVERDUB". 1.) NORMAL - All data stored
before are erased. 2.) OVERDUB - The played-in
notes are added to the already existing ones.
Pressing the "+"-button once more after having
already selected the "OVERDUB"-mode, another
treat follows, a special recording-stratedy called
"DYNAMIC". With the help of the "Wheel 2" the
dynamic of the already existing notes is recorded
anew. Using sounds whose cut-off-frequencies are
influenced by the velocity you can record changing
filter-sounds without needing any additional
memory.
If you have erased a track inadvertantly, recorded a
bad overdub track or have just made another boob -
don´t mind ! With the Undo-function you can
always reinstall the last version of your track into
the memory.
Now you´ve got given your best effort but then the
skill of your fingers failed. With the help of the
"QUANTIZE"-function you can correct dirtily
played-in tracks. With the "+/-"-buttons you can
select the value of the quantizing, the following
values are possible: 8th, 12th, 16th, 24th,and a 32th
grid. But if the tracks have been played in too
dirtily, even the marvellous feature of the
quantizing-function can´t correct that anymore.
This parameter cannot be changed, it only indicates
the remaining memory.
4
Advertisement
Table of Contents
