Selecting The Key-Velocity Curve - Quasimidi CYBER-6 Manual

selecting the key-velocity curve

selecting the key- We´re quite proud of the velocity-behaviour of our Keyboard. The velocity evaluation of the operating
velocity curve system is exactly designed to fit the Keyboard. In some cases, though, you might want to use a different
velocity-feel. The CYBER-6 has eight different velocity-curve presets from which you can choose. To
choose the velocity curve, pick page 5 from the main menu and select the "CALIBRATION" option with
the "cursor"-buttons.
Then press [ENTER], and the Calibration submenu should appear:
Pick the "Dynamics" option. The following settings are available:
name
LIN
-DYN
+DYN
FIX
-EXP1
-EXP2
+EXP1
+EXP2
54
< 5| INIT/DUMP
Dump:------------
| 1| Calibrate
Controller:
dynamic-response
The velocity is linear
the velocity curve is slightly compressed. The silent parts are a bit
louder, the louder ones a bit mor quiet.
The velocity curve is linear, but steeper
The velocity is not dependant on how you play (85 / 127)
The velocity curve is exponetial and slightly compressed.
Same as -EXP1, but more compression
Exponetial and expanded
A bit more expanded
CALIBRATION
Init? ----
Dynamics: LIN
AFTER Value:---