Assigning Of Special Footswitch-Functions - Quasimidi CYBER-6 Manual

Assigning of special footswitch-functions

Assigning of Apart from the the ones described in the "masterkeyboard edit menu" section, there are a few other special
special footswitch- functions assignable to footswitch 2. This functions are available on page 4 of the main menu. Pick this
functions page using the page dial:
Now you can choose the desired function for footswitch2 using the + / - buttons. The following functions
are available:
desired function
Masterkeyboard function
Remote control in the CHAIN mode
Sequencer Start/Stop
Freezing a Motivator sequence and enabling
the Motivator transpose function
The function of the footswitch 2 will be memorized automaticly.
< 4> CYBER-6
Footswitch2 Function: Masterkeyb
name
Masterkeyb The CYBER-6 uses the settings from the current
Chain-Step
Start/Stop
Mot-Freeze This setting enables the a special Motivator
description
masterkeyboard program
While being in the CHAIN-STEP menu, you can
use the footswitch like [ENTER] to freeze a step. If
there is no step length programmed, the footswitch
can be used to simply jump to the next step. The
masterkeyboard footswitch-function is disabled in
this mode.
This function enables you to use the footswitch 2
to start or stop the sequenzer. Again, the function
assigned to footswitch 2 in the masterkeyboard
program is disabled.
function. As long as the footswitch is held down,
no new notes can be entered in the Motivator
mode, but the assigned part of the keyboard can be
used to transpose the sequenze in realtime.
55