The Sysex-Dataformat - Quasimidi CYBER-6 Manual

the SYSEX-Dataformat

The Sysex- CYBER-6 SYSTEM-EXCLUSIVE Format
Dataformat ===============================
Request Data from device: (V1.0 ff)
————————————
Dump Data to device:
——————————
Adress Map
==========
Notes:
———
Only entire programs / patterns / chains may be transmitted and thus should always received entirely.
Incomplete / corrupt data for patterns / chains can lead to complete chaos in your CYBER-6 memory!
For the same reason, the amount of steps in a chain is implicated in the Chain adress LOW (so the CYBER-
6 can calculate the memory space needed in advance and not overwrites othe data). The data in the pattern
and chain areas are nibbled, using one byte for the higher 4 bits and one for the lower 4 bits.
Byte No. Value Remarks
0 F0 System Exclusive start command
1 3F Quasimidi id number
2 00 device number
3 24 CYBER-6 id number
4 52 (R)equest data
5 ah adress high
6 am adress mid
7 al adress low
8 dh data count high
9 dl data count low
10 F7 end of System Exclusive
Byte No. Value Remarks
0 F0 System Exclusive start command
1 3F Quasimidi id number
2 00 device number
3 24 CYBER-6 id number
4 44 (D)ump data
5 ah adress high
6 am adress mid
7 al adress low
8... dt data (7 bit)
... F7 end of System Exclusive
H M L
00 xx 00 Masterkeyboard-Program xx (0..127)
01 xx 00 Motivator-Program xx (0..63 MOT1, 64..127 MOT2)
02 xx 00 Pattern-Nr xx (nibbled!)
03 xx yy Chain-Nr xx, contains yy steps (nibbled) (important!)
57