Table of Contents
Advertisement
The SYSEX-Dataformat
Motivator-Program
—————————
1
1
1
1
1
32
1
8
8
8
8
1
Chain-mode
——————
1
1
1
1
1
1
1
converting of
Together with the CYBER-6 you´ll get a disk which includes a program, that allows you to convert stand-
standard-MIDI
ard MIDI-files into the format used by the CYBER-6. Afterwards, the MIDI-file can be dumped to the
files into the
CYBER-6. Thus, a convenient way of exchanging data between the CYBER-6 and your sequencer pro-
cyber-6´s dump
gram is possible. Since this program was not ready for the deadline of this manual, the manual for it is
format
included on the disk as well. The program is available in 2 different versions, supporting IMB PCs (286
min + MIDI interface) as well as ATARIs (260 ST). There are 2 directories on the disk:
1.) ATARI
2.) IBM
All files necessary for the use of this programs are contained within these directories. Read the file
Convert.TXT for installation and operation.
Note-Repeat 1..4
Octaves (only arpeg-mode) 1..4
Gate-Time 0..127
bit 0..2 Resolution 0..4=8tel,12tel,16tel,24tel,32tel
bit 3..4 Direction (arpeg-mode) 0..3=up,down,up+down,random
bit 5..6 Mode 0..2=arpeg,gater,chord
bit 0 reserved
bit 1 sort
bit 2 hold
bit 3 velocity
bit 4 reserved
bit 5 oneshot
bit 6 length-fit
Rhythmik
bit 0..2 Instrument 0..7=Inst 1..8
bit 3 On/Off für beat
bit 4..6 Dynamik
loop-length 1..32
channel of Instrument 0=off,1..32=A1..B16
Bank of Inst 0..127
Program of Inst 0..127
Volume of Inst 0..127
Gater-Controller-Nr 0=Aftertouch,1..90 Controller 1..63,80..95
speed in BPM
per Step 6 bytes
Masterkeyboard-Program-Nr 0=No change,1..128 Program,255 End
Pattern-Nr 0=No change,1..99 pattern,255 End
number of bars 0=endless,1..99
sequence-transpose 0..12..23 in halftones
track-muting bit0=Track1,bit1=Track2,...
keyboard-transposer 0=off,1=1Octave up,2=1Octave down,
3=1/2Octave up+1/2 Oct down,2 Octave range
59
Advertisement
Table of Contents
