Editing Of The Input Sections - Quasimidi Rave-O-Lution 309 Owner's Manual

The Audio-Inputs

Editing of the Input Sections:

For each of the two Audio Inputs IN-1 and IN-2 you have a complete A.E.S. synthesis section
available. This means, you can treat (affect) the external sound-sources with the same
parameters, which previously were only for internal use on your instrument. As there are no
separate pots on the front panel for the inputs, thefollowing will show you how to access these
new parameters.
As a 309 Owner we assume you are familiar with accessing the pots, of the BASS-LEAD-
SYNTHESIZER (for sound editing purposes), via the SELECT buttons of the individual
instrument sections. The same applies with the audio inputs. Here the F1-F3 buttons found under
the display serve as SELECT buttons. F1 can be used for the selection of IN-1, the F2 button for
the selection of IN-2. Using F3 you can select simultaneous use of In-1 and IN-2. This is
particularly useful for the treatment of stereo signals coming from a CD Player for instance.
Specifics about the Edit Menus of the Audio Inputs:
There are two ways to access the Edit Menu of the audio inputs. The first one you already know.
Push the EDIT button to the right of the Display. You are now in the SELECT EDIT Menu. Push
the right PAGE button. When you reach page 5 of the menu, the display will show:
Open the menu [Ex1] by pushing the F1 button. The display should show the following menu
page:
You can achieve the same result by double clicking the F1 button while in the main menu. This
step will open the Edit Menu for Input 1 directly. The same procedure works with buttons F2 and
F3. Double clicking F2 opens the Edit Menu for Input 2 and double clicking F3 opens the Edit
menu affecting both inputs simultaneously (Stereo mode). Now push the left PAGE button until
the display shows menu page 2:
On this page it is possible to adjust the level of the external sound source in relation to the internal
sounds of the 309. You can also adjust this parameter with the level pot of the BASS-LEAD
Section, while holding down the F1 button.
Push the right PAGE button to get to the next menu page:
10
Select Edit
_[Ex1][Ex2][1&2]
Edit Ext1-Sound
<6> Wav:
Edit Mix T: Ext1
|1> MixLevel:100
<5|
---