Table of Contents
Advertisement
Step by step programming
additional editing of the velocity
Delete single or all (hits) steps of a selected
instrument
exercise 10: get to
You will know that this way of drumprogramming is an easy way to generate fantastic grooves. You will
know the drum-
ask yourself why you operate the drum-grids of "software sequenzer programms" with a mouse. By using
programming
the keyboard you come to an eaven faster result. And also this way of drummprogramming is useful to
learn important things of (about) grooves. Select the closed-hihat and "paint" the keyboard . Immediadly
your selected instrument will play in an straight 16´quantize. If you adjust the 16´groove on 50-100%
(page 1of sequenzer-edit-menue) anybody will believe that this groove was made on a hardware-sequencer.
step by step in another way :notes first and then the groove.
Step by Step record-
This is the last way of the recording-mode. Please push the exit-button to leave the drum-editor. And now
ing
you select the edit-page 6. This way of recording is better for tonal sounds (piano,bass,...). Please select
another track of this pattern for the new record. You will see the parameter step-rec beside the parameter
drum-grid. With the +/- buttons you can change between
Please select notes first when no notes still in memory,because timing without notes ....?? Put the param-
eter step-rec on notes and then push the enter-.button. Now you have a lot of time to play your e.g. "melody"
or "bass-line" (one note-cup of tea-one note-cup of tea-one.....). you can play single notes or completly
chords. But you should have to let off the keys for any new step of following timing, because the CYBER-
6 have to register the new position in the groove. (????) . If the recording of notes and chords are ready,
you can change to the timing-mode (push + button). After pressing the enter-button you will hear the
metronome. Each touch of any key will play the next note (or chord). Now you can concentrate to the
rhytmik only. With this option you can create the strangest and virtuoso sequencer-lines which your
synthesizer ever "heard".
Dyn
Clr
1.) Notes -
2.) Timing -
If you want to change the velocity, without
changing the groove,you should select this mode.
Touch the key, which corresponds to Grid
position,until you are satisfied. The other way is:
press the relevant key simultaneously to moving
"wheel 2" .
The way to select the instrument,you want to
delete,is the also the same. Contrary to Step-mode,
you can only delete steps. If you want delete all
steps,you have to touch all keys (paint the
keyboard).
41
Advertisement
Table of Contents
