Table of Contents
Advertisement
Snapshot: Copy motivator patterns to the sequencer
sequencer realtime controls seq mod 1-3 of the masterkeyboard programs may be routed to the controllers
of the Cyber6. The real effect of the controller to sequenzer tracks wouldn´t be assigned in the masterkeyboard
programs. This would be mean, that a change of sequencer pattern has to require a change of the
masterkeyboard program, of course you want to have in different pattern different assignments of controls.
For this reason result the assignment of the kind of modulation in the sequenzer pattern and the assign-
ment of " hardware-controller in the masterkeyboard programs. By this trick the combination of sequenzer
pattern to masterkeyboard programs is free. When you mean that three realtime controller isn´t enough
you can get a zone of a masterkeyboard program in the "control-only" mode. The controller of this zone
would be assigned to the sequencer tracks with same MIDI-channel. It´s very easy to program the realtime
controller. You have to adjust the realtime controller SeqMod1-3 with the right MIDI-controller. Direct
after the controller entering you can adjust the track.Select the sequenzer track you want to modulat in
realtime.
Deleting MIDI-
If you want to delete some MIDI-controller data, you have to go to page 9 in the sequenzer edit mode.
controller mes-
sages
By pushing the "+/-" button you can select the track you want to edit. If you want to hear the selected track
solo you have to push the INFO button. Now push the "ENTER" button and the MIDI-controller on this
track should be delete.This process could be undone by the UNDO-function.
Using the snapshot function you can transmit Motivator themes directly into the sequenzer section. This
SNAPSHOT-
function seemed very important to us, because the Motivator quite often produces exciting themes, melo-
COPY: Transmis-
dies, whatever, and you might want to add them to your archives. Once these notes are transmitted into the
sion of Motivator
sequencer, you can edit them by transposing, adding to them or combining them with other tracks. Since
themes into the
the Motivator themes quite often use mutlitple MIDI-channels, they can only be copied to empty patterns.
Sequencer.
Since the snapshot copy function is quite often activated spontanously, the CYBER-6 automatically lo-
cates the next empty pattern and copies the theme to it. When multiple MIDI-channels are used, one track
is created within the pattern for every instrument used. You may only transmit the data from Motivator I,
but still you may copy the themes from Motivator 2 by simply copying them to Motivator I. This function
seemed so incredibly important to us that we built the delightfully well-designed "snapshot-copy" button.
Simply press this button while being in the Motivator mode to copy the current Motivator sequence. The
following message should appear on your display:
< 9>
DELETE CONTROLLERS of Track: 1
REALLY Snapshot MOTIVATOR into Pattern?
ENTER=Yes/Exit=No
1 cycles
43
Advertisement
Table of Contents
