Table of Contents
Advertisement
Other functions
Item
Trigger Function
INTERNAL
EXTERNAL
Trigger delay
Accuracy
Average function
Memory function
key lock
Zero adjustment
Adjustment range
Measurement logging and
collective transfer function
EOM function
HOLD
PULSE
Accuracy
BIM1000 Series
Specifications
Select external trigger (EXTERNAL) or internal trigger (INTERNAL).
Measures at the sampling speed (FAST, MID, SLOW) interval.
Starts measurement with a SIGNAL I/O connector signal, *TRG, or the SNGL TRG key on
the front panel.
0 to 9.999 s, OFF
±0.2 ms
The average count can be set between 2 and 99. OFF setting available.
Saves up to 100 sets of measurement conditions.
Locks the key operation.
Zero adjustment of the voltmeter and resistance meter. OFF setting available. Zero point
clear function available.
1000 digit
Records up to 500 sets of measurement logs. Logs can be read collectively.
Outputs an EOM signal from the SIGNAL I/O connector when a measurement is com-
pleted.
When the trigger source is set to INTERNAL, the signal is turned on after a measurement is
completed until the next measurement starts. When the trigger source is set to EXTERNAL,
the signal is turned on after a measurement is completed until the next trigger is detected.
Outputs a pulse when a measurement is completed.
Pulse width: 1 ms to 99 ms
±0.2 ms
Specifications | Basic specifications
User's Manual
83
Advertisement
Table of Contents
