Kikusui BIM1000 Series User Manual page 64

Remote Control | Message Reference
Sampling speed
Program header
Value
Response
Average function
Program header
Value
Response
 Average count
Program header
Value/Response
Judgment function
 Resistance and voltage measurement judgment function
Turns on or off the upper and lower resistance and voltage limit judgment functions.
Program header
Value
Response
Note
 Resistance judgment function
Program header
Value
Response
Note
64
User's Manual
:SAMPle:RATE
:SAMPle:RATE?
{SLOW|MEDium|FAST}
{SLOW|MEDIUM|FAST}
:SENSe:AVERage:STATe
:SENSe:AVERage:STATe?
{1|0|ON|OFF}
{ON|OFF}
:SENSe:AVERage
:SENSe:AVERage?
<2 to 99 (NR1)>
:SENSe:JUDGment:STATe
:SENSe:JUDGment:STATe?
{1|0|ON|OFF}
{ON|OFF}
The setting may change when a :SENSe:JUDGment:RESistance:STATe or
:SENSe:JUDGment:VOLTage:STATe is received.
:SENSe:JUDGment:RESistance:STATe
:SENSe:JUDGment:RESistance:STATe?
{BOTH|OFF|UPPer|LOWer}
BOTH: Turns on the upper and lower resistance limit judgment functions simultane-
ously
OFF: Turns off the upper and lower resistance limit judgment functions simultane-
ously
UPPer: Turns on only the upper resistance limit judgment
LOWer: Turns on only the lower resistance limit judgment
{BOTH|OFF|UPPER|LOWER}
If :SENSe:JUDGment:STATe is set to ON (1), the value changes to BOTH.
BIM1000 Series