Table of Contents
Advertisement
Remote Control | List of Messages
Program header
:SYSTem:EOM:MODE
:SYSTem:EOM:MODE?
:SYSTem:EOM:PULSe
:SYSTem:EOM:PULSe?
:SYSTem:CURRent
:SYSTem:CURRent?
:SYSTem:ERRor?
:SYSTem:RESet
*1.
Response data for queries
Trigger source
Program header
:INITiate:CONTinuous
:INITiate:CONTinuous?
:INITiate[:IMMediate]
:TRIGger:SOURce
:TRIGger:SOURce?
:TRIGger:DELay:STATe
:TRIGger:DELay:STATe?
:TRIGger:DELay
:TRIGger:DELay?
*1.
Response data for queries
Measurement value acquisition
Program header
:FETCh?
:READ?
:DATA:FORMat
:DATA:FORMat?
*1.
Response data for queries
Other
Program header
:IO:IN?
*1.
Response data for queries
58
User's Manual
*1
Parameter
HOLD|PULSe
HOLD|PULSE
0.001 to 0.099
0.001 to 0.099
CONTinuous|PULSe
CONTINUOUS|PULSE
See
p.70
.
–
*1
Parameter
1|0|ON|OFF
ON|OFF
–
INTernal|EXTernal
INTERNAL|EXTERNAL
1|0|ON|OFF
ON|OFF
0 to 9.999
0 to 9.999
*1
Parameter
When measuring resistance and voltage: <Resistance measure-
ment (NR3)>,<Voltage measurement (NR3)>
When measuring resistance: <Resistance measurement (NR3)>
When measuring voltage: <Voltage measurement (NR3)>
When measuring resistance and voltage: <Resistance measure-
ment (NR3)>,<Voltage measurement (NR3)>
When measuring resistance: <Resistance measurement (NR3)>
When measuring voltage: <Voltage measurement (NR3)>
RESistance|VOLTage|RESistance,VOLTage
RESISTANCE|VOLTAGE|RESISTANCE,VOLTAGE
*1
Parameter
0 to 33
Description
Sets the EOM output mode
Queries the EOM output mode setting
Sets the EOM pulse width
Queries the EOM pulse width
Sets the current pulse output
Queries the current pulse output setting
Queries errors
Resets the settings to their factory defaults
Description
Sets the continuous measurement
Queries the continuous measurement setting
Switches to trigger wait state
Sets the trigger source
Queries the trigger source setting
Sets the trigger delay
Queries the trigger delay setting
Sets the trigger delay time
Queries the trigger delay time
Description
Reads the SIGNAL I/O input
Description
Reads the most recent
measured value
Executes a measure-
ment and reads the
measured value
Sets the response format
Queries the response
format
BIM1000 Series
Advertisement
Table of Contents
