Scopia® Xt4300 - Avaya Scopia XT Series Release Notes

Scopia® XT4300
Figure 6: Scopia® XT4300 with Flex Camera
This version supports Scopia® XT4300, the new Small-Medium rooms solutions of Scopia® XT
Series, using a new generation camera, Scopia® Flex Camera (1080p 60fps camera, PTZ, ~70°
Hz View Angle).
In this endpoint, camera zoom is limited to 5x, expandable to 15x total (5x optical, 3x digital) using
Zoom Upgrade option license. Video and presentation are supported, up to 1080p60. Additional
HD monitor out can be enabled with option. Also embedded MCU4 and SMB4 are available as
options.
Flex Camera Settings
Several unique options can be configured for the Scopia® Flex camera.
[GUI]
[W ]
EB

Ceiling Mount: Yes/No*

IR Receivers: Both*/ Left only/Right only/None

White Balance Mode: Automatic*/ Indoor / Outdoor/ Customize[with Calibration]/ Wide
Automatic

Picture: Automatic*/ Manual[ with Saturation, Hue, Contrast, Brightness]

Wide Dynamic Range: Off/1,2,3*,4,5
(*default values)
Release Notes for Avaya Scopia® XT Series
Important
o
Scopia® XT Camera Switch is not supported by Scopia® XT4300 endpoints
o
Scopia® Flex Camera cannot be VISCA cascaded with any other Camera
Scopia® Flex Camera is not available as a "standalone" P/N to be used with other
o
Scopia® XT Series Endpoints
> C > A > I/O C
ONFIGURE DVANCED
> A S >> I/O C
DMINISTRATOR ETTINGS
Important
o
Some manual camera parameters now have an "Adjust" button (for instance
Focus mode, Exposure Compensation, etc.).
> HD1 C
ONNECTIONS AMERA
> HD1 C
ONNECTIONS AMERA
What's New | 9