Avaya Scopia XT Series Release Notes page 72

Category
Telepresence
Recording
Mobile
Link/Screen Link
Snapshots &
Web Video
AT commands
Security
Video Privacy
Release Notes for Avaya Scopia® XT Series
Incident ID Description of issue
In few/random cases the XT does not
QC#16278 get the IP Address in permanent way
from DHCP.
The system may not function properly
QC#18450
after modifying the network settings.
To execute commands when using a
QC#18671 telnet connection to port 60123, press
'Enter' twice after each command.
If the system is set to check the GLAN2
port as the preferred port, it is possible
QC#15025
to make outgoing SIP UDP calls to a
local IPv6 link over the GLAN1 network.
The XT GUI displays the un-correct
network information when detaching and
QC#26262
attaching the cable very quickly while
using an old Aethra DHCP server.
When setting up a Telepresence
system, it is strongly recommended to
use static IP addresses for the three
endpoints
XT can stuck or video could not work
RVXT5000-888 properly if the USB key is unplugged
while a USB recording is in progress
ScreenLink][MobileLink] Wrong Sonic
RVXT5000-1279 Detection of IP addresses containing a 0
(x.0.x.x or x.x.0.x)
When recording is active or the HD1
monitor is duplicated, it is not possible to
select the single source to snapshots.
The content of the whole screen will be
captured.
RVXT5000-1261 Video Snapshot got using
https://xxx.xxx.xxx.xxx/web/utils/GetSna
pshotEx.php?pw=password&type=video
is always the previous one and never
the current camera image
Issue about TLS/SSL RC4 Cipher
RVXT5000-1251
1-6269527820
RVXT5000-1250 Issue about SSL version 3
1-6269527820
RVXT5000-1249 Issue about Click Jacking
1-6269527820
RVXT5000-1246 TLS/SSL Weak Cipher
1-6269527820
RVXT5000-1245 Cross Site Scripting Vulnerability
1-6269527820
RVXT5000-1238
Some SNMP, LDAP, HTTPS, TCP
Vulnerabilities
RVXT5000-1242 Video Privacy is not managed as
expected in embedded MCU with a TE
audio-video and a TE audio only
RVXT5000-1132 Video Privacy is not hidden creating the
meeting from XTD client
RVXT5000-1236 The video window is not removed from
MCU layout if the first call is in video
privacy
Solution
Set the Speed/Duplex Mode to
'Automatic - Up to 100/Full' or lower.
Reboot the system to apply the
update.
Set GLAN1 as the preferred
network.
It is required to stop the recording
before unplugging the USB key.
Use manual selection of XT or
contact Customer Support to require
a hot fix.
A hot fix for this issue is available
through CS.
A hot fix for this issue is available
through CS.
A hot fix for this issue is available
through CS.
A hot fix for this issue is available
through CS.
A hot fix for this issue is available
through CS.
A hot fix for this issue is available
through CS.
A hot fix for this issue is available
through CS.
A hot fix for this issue is available
through CS.
A hot fix for this issue is available
through CS.
A hot fix for this issue is available
through CS.
Known Issues | 72