Avaya Scopia XT Series Release Notes page 70

Category
Release Notes for Avaya Scopia® XT Series
Incident ID Description of issue
function.
Polycom diagnostics incorrectly
QC#2981
identifies Scopia® XT Series systems.
Incident #16384-10505: Remote camera
switch from HDX to XT5000 and reverse
QC#11493
is not performed. Issue reported to
Polycom.
Cisco C20 cannot control the XT5000
QC#2964
camera in H.323 calls.
Polycom MGC systems (v9.0Scopia®
XT Series does not receive the video
stream when it is connected to MGC
with default settings (reference Pivotal
QC#6665
#16384-7589).
LifeSize Express LS_EX1_3.0.7 (2)
produces corrupted audio in SIP calls
with audio coding based on G.722.1
Annex C, 48 kHz.
QC#5567
Scopia® XT Series cannot establish
incoming point-to-point SIP calls if H.264
coding is used.
IOT issue with Tandberg/CISCO
MXP1500.
QC#16828
Reported to Tandberg/Cisco.
The Tandberg/CISCO MXP1500 does
QC#17464 not send video to the as soon as a call is
started. Reported to Tandberg/Cisco.
Avaya 10x0(Lifesize) v4.8 issue.
Avaya Integration Rad #57 [XT/SIP]: An
QC#16857
XT5000 registered with SIP cannot
share content (via BFCP) with Avaya
1000-series endpoints.
Cisco C20/SX20 SIP presentation
QC#22592
interoperability issue when it placed a
QC#22593
call towards an XT5000 MCU
RVXT5000-1259 MCU6000 doesn't manage the video
privacy sent from XT system sip
connected to the meeting
RVXT5000-1258 BFCP over UDP interoperability - BFCP
channel is not opened using version 2 in
the BFCP header (see Acano,
BlueJeans, Cisco CTS)
RVXT5000-1257 BFCP over UDP interoperability - BFCP
channel is not opened when the remote
offers a BFCP media line without the
"setup" attribute (see Cisco VCS)
RVXT5000-1256 FCP over UDP interoperability -
Receiving a wrong FloorRequestStatus
message from Polycom RMX MCU the
BFCP channel is closed
RVXT5000-1255
BFCP interoperability - Parsed "c-only s-
only" string to have interop with Pexip
and Cisco UCM
Tandberg MXP Series interoperability
QC#26201
issue when placing SIP TLS calls.
RVXT5000-1239
Audio call icon shown in embedded
MCU with Polycom Group
Solution
For low bit rate calls (up to
256Kbits), set the maximum call rate
of the XT5000 to 2M (the same max.
rate as MGC) in the Administrator
Settings > Call Preferences page.
For 384Kbit- 2Mbit calls: In the MGC
Advanced Properties page, deselect
Auto Video Bit Rate.
Update LifeSize Express to latest
version. As a temporary alternative,
disable G.722.1 from the web
interface by navigating to
Administrator Settings > Calls >
Preferences > Audio
Disable H.264 High Profile on
XT5000. Configure > Advanced >
Preferences > Video
Disable H.264 High Profile on
XT5000.
Upgrade Avaya 1000-series
endpoints to version 4.9 or higher.
Upgrade CISCO C20 to latest
version.
A hot fix for this issue is available
through CS.
A hot fix for this issue is available
through CS.
A hot fix for this issue is available
through CS.
A hot fix for this issue is available
through CS.
A hot fix for this issue is available
through CS.
Configure > Advanced > Protocols >
SIP > TLS > Enabled =No
Known Issues | 70