Configuration A Macintosh Computer To Dial The Access Easy Controller - Bosch Access Easy Controller Hardware Manual

Access Easy Controller
10.8 Configuration a Macintosh Computer to Dial the Access Easy
Controller
1.
2.
NOTICE!
i
Point-to-Point Protocol is a protocol for communication between two computers using a serial
interface, where a personal computer is connected by phone line to a server.
3.
4.
5.
Bosch Security Systems
Select Control Panel from the Apple menu, and then select TCP/IP.
The TCP/IP screen will be shown as below. Change the Connect via to PPP and Config-
ure to Using PPP Server.
Next, select Remote Access from the Control Panel sub-menu.
The Remote Access dialog box is displayed. Enter the dial-in user name and password for
the Access Easy Controller to which you want to connect. Also enter the dial-in number
in the Number field.
Click Connect to remotely access the Access Easy Controller.
Hardware Manual
Dial-Up Networking | en 75
Ver 2.0.0 | 2006.07