Access Easy Controller
3.
4.
5.
Bosch Security Systems
Look up for TCP/IP from the list as shown in the following diagram. If the component is
found, highlight it by single clicking on it. Then skip forward to step 8 of this procedure.
However if the component is not found, continue with steps 4 to 7 and install the compo-
nent.
If TCP/IP is not found, then you will need to install it. To add the TCP/IP component,
click on the
Highlight the Protocol line by single clicking on it, and then click on
Hardware Manual
How to Install & Set the TCP/IP Address on a PC | en
button to bring up the following dialog box.
57
.
Ver 2.0.0 | 2006.07