Procedure To Terminate Modular Plug Cable Assembly - Bosch Access Easy Controller Hardware Manual

186 en | APPENDIX A RJ45 Cable Assembly Procedure
NOTICE!
i
This arrangement has 2 pairs of conductor for Transmit and Receive crossed. Use in direct
connection between devices, e.g. Access Easy Controller to Central Monitoring Computer.
25.3

Procedure to terminate Modular Plug Cable Assembly

Before proceeding, double check to be sure cable and plug are compatible, and that cable
polarity is correctly maintained for your specific application.
1.
2.
Ver 2.0.0 | 2006.07
Step 1
a. Hold plug as shown (locking tab facing UP).
b. Insert cable into plug until fully bottomed.
Step 2
a. Open tool handles.
b. Insert plug assembly fully into die cavity.
Hardware Manual
Access Easy Controller
Bosch Security Systems