Network Configuration On A Macintosh Computer - Bosch Access Easy Controller Hardware Manual

Access Easy Controller
9.
10. Enter the IP Address and Subnet Mask Address. The following examples shows the rec-
11. Click
12. The computer will proceed to configure the TCP/IP settings. When it is finished, you will
9.1

Network Configuration on a Macintosh Computer

The example in this section describes the procedure for configuration the network address on
an iMac computer. When configure other models of Apple computers, the screen presenta-
tions may be slightly different from those shown here. However, the basic steps will be the
same.
1.
2.
Bosch Security Systems
Select Use the following IP address radio button. This will enable the fields for IP
Address and Subnet Mask.
ommended address and subnet mask to assign to the computer to communicate with a
brand new Access Easy Controller as received from the factory. Leave DNS field blank
after verifying that the IP address and subnet mask have been correctly
entered.
be prompted to reboot the computer for the new settings to take effect.
Click the Apple icon to show a list of control functions.
From the list, select Control Panels, TCP/IP as shown in the following sample screen.
Hardware Manual
How to Install & Set the TCP/IP Address on a PC | en 59
Ver 2.0.0 | 2006.07