Led Indicators - Bosch Access Easy Controller Hardware Manual

Access Easy Controller
19.1.3

LED Indicators

There are 4 Light Emitting Diodes (LEDs) on the Convertor Card. The status of these LED indi-
cators allows for quick diagnostics purposes. Their indicating status is described below: -
CPU
Tx & Rx
Card Read
Bosch Security Systems
This LED will be blinking constantly, it is an indication of the card is still run-
ning normally.
Indicates the communication between the Secure/Communication Card. It
should be flickering at all times.
Whenever a reader reads a card this LED will blink once.
Hardware Manual
Convertor Card | en 151
Ver 2.0.0 | 2006.07