Controller Specifications - Bosch Access Easy Controller Hardware Manual

Access Easy Controller
CE Version (Not for UL Listed System)
System L 16
System 0 12
System p 16
System R 8
System S 12
System T 16
3.4

Controller Specifications

Hardware Specifications
General
Bosch Security Systems
32
24
24
32
32
32
Power Supply:
Input Supply: 18 VAC (UL Listed System)
a. 230VAC (CE Listed System, using Power Supply Unit)
b. Battery backup: 12V, 7.0AH
c. Battery charging: Built-in charger
Card Reader supported:
a. Basic controller supports 4 readers
b. Fully configured pane supports up to 16 readers
c. Strike Output Relays: Included on reader interface card.
d. Door Contact Inputs: Included on reader interface card.
e. Request-to-exit Inputs: Included on reader interface card.
Reader Type: Any 2-wire Wiegand output reader. HID Proximity readers recommended.
The following readers have been verified by UL for compatibility with the controller :
a. HID MiniProx Reader
b. HID 20676 ProxPro with Keypad Reader
c. HID 20676 ProxPro without Keypad Reader
d. HID 20520 ProxPoint Reader
Inputs: Maximum of 32. Both normally open and normally closed devices supported.
Outputs: Maximum of 32 (From-C PCB mounted output control relays). Contact rating: 1
Amp @ 24 VDC.
Dimensions of Access Easy Controller and Access Easy Extension :
H: 525mm x W: 455mm x D: 90mm
Hardware Manual
32 1 3
24 1 2
24 1 3
32 1 1
32 1 2
32 1 3
System Layout | en
4 2 2
3 2 2
3 2 2
4 2 2
4 2 2
4 2 2
Ver 2.0.0 | 2006.07
15