Bosch Access Easy Controller Hardware Manual page 2

All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, without the prior written permission of BOSCH SECURITY SYSTEMS.
This manual is provided pursuant to a license agreement containing restrictions on their use.
The manual contains valuable trade secrets and proprietary information of BOSCH SECURITY
SYSTEMS and is protected by international copyright law. It may not be copied or distributed
to third parties, or used in any manner not provided for in the said license agreement.
All software is provided "AS IS." The sole obligation of BOSCH SECURITY SYSTEMS shall be to
make available all published modifications that correct program problems are published
within one (1) year from the date of shipment.
The software is intended for use only with the hardware specified in this manual and in the
absence of other software. Concurrent use with other software or with hardware not speci-
fied may cause the program to function improperly or not at all. BOSCH SECURITY SYSTEMS
may not provide support for systems operating under such conditions.
All efforts have been made to ensure the accuracy of the contents of this manual.
The above notwithstanding, BOSCH SECURITY SYSTEMS assume no responsibility for any
errors in this manual or their consequences.
The information on this document is subject to change without notice.
Access Easy Controller™ is a trademark of Bosch Security Systems
Other product and company names mentioned herein may be the trademarks of their
respective owner
NOTICE!
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial envi-
i
ronment. This equipment generates, and uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference
at his own expense..