Changing Pin Code - Bosch Access Easy Controller Hardware Manual

164 en | Card Reader Keypad Functions
To Clock In
Press the
the door will be unlocked if the cardholder has been given the access right.
To Clock Out
Press the
door remains locked.
If presenting card without pressing any one of these two keys, the reader will resume normal
door access operation. There will not be any Clock In or Clock Out transactions.
21.2.4

Changing PIN code

The PIN code can be changed by first activating the
card. General steps to change the PIN code.
1.
2.
3.
4.
5.
For example, suppose you want to change an old PIN code (8088000) to a new PIN code
(4321).
1.
2.
3.
4.
5.
Ver 2.0.0 | 2006.07
key of the Entry Reader and present your card. The LED will flash once and
key of the Entry Reader and present your card. The LED will flash once. The
Press the or
Present Card - LED flash at a slow rate.
Enter the old PIN code (followed by the
flash at medium rate.
Enter the new PIN code (followed by the
LED stops flashing.
Press or key (PIN code change completed).
First, press or
Present your card to the Reader. The LED will start to flash continuously at a slow rate for
the duration as depicted in the Keypad Timeout field.
Enter the old PIN code
flash continuously at medium rate. However, if the PIN entered is wrong, the LED will
flash continuously at a fast rate. In this case, press
1.
Enter the new PIN code
Press the or
Hardware Manual
key.
or
or
key.
key.
Access Easy Controller
or key before presenting the
key if it is less than 7 digits) - LED
key if it is less than 7 digits) -
, the LED will
or and repeat from step
, followed by or
Bosch Security Systems
key.