Bosch Access Easy Controller Hardware Manual page 22

22 en | Is Access Easy Controller the Correct Choice for Your Client?
2.7 A Web browser program is not available on the computer of the person designated to man-
age the Access Easy Controller 's database
You arrived here because a Web browser program is not available on the computer of the per-
son designated to maintain the Access Easy Controller's database. Because all of Access Easy
Controller's database screens are written in industry standard HTML language, a Web browser
is necessary to manage the database. Either Netscape Navigator version 4.0 and later or
Microsoft Internet Explorer version 4.0 and later can be used.
Possible solutions:
1.
NOTICE!
i
There are several third party browser programs available on the marketplace. None of these
have been validated by Bosch for proper operation with Access Easy Controller.
2.
2.8 Customer's network can't support static addresses
You arrived here because the customer's network configuration is not capable of supporting
static IP addresses. Many times, a customer's network is configured to support Dynamic
Address Allocation. Under Dynamic Address Allocation procedures, each time a computer
signs on to the network it will be allocated an IP address. The address assigned to a com-
puter under dynamic address allocation rules will vary from one login session to the next.
Possible solutions:
1.
2.
Ver 2.0.0 | 2006.07
Install a copy of Web browser program on one or more computers. Both Microsoft and
Netscape offer their browsers for the download free of charge over the Internet. Browser
programs are available for Window , Apple/Macintosh , and Unix operating systems. The
Access Easy Controller can communicate with either the Netscape browser or the
Microsoft browser running under any of the standard operating systems (Windows,
Apple, or Unix).
Dedicate a new computer configured with a browser to work with Access Easy Control-
ler.
Configure the network to support static addresses. Customers should check with their IT
department or computer vendor. Most networks that are configured for Dynamic
Address Allocation will also support static addressing.
The customer can provide a non-networked computer to work with Access Easy Control-
ler. This computer will need to be configured for 10 MB Ethernet and TCP/IP protocol.
This computer can then be directly connected to the Access Easy Controller using the
crossover type cable.
Hardware Manual
Access Easy Controller
Bosch Security Systems