Flow Connections of the Quaternary Pump
Tools required
Two wrenches 1/4–5/16 inch for capillary connections
Parts required
Description
Other modules
Parts from accessory kit, see
Preparations
• Pump is installed in the LC system.
When opening capillary or tube fittings solvents may leak out.
WA R N I N G
The handling of toxic and hazardous solvents and reagents can hold health risks.
➔
1 Remove the front cover by pressing the snap fasteners on both sides.
1200 Series Quarternary Pump User Manual
Please observe appropriate safety procedures (for example, goggles, safety gloves
and protective clothing) as described in the material handling and safety data sheet
supplied by the solvent vendor, especially when toxic or hazardous solvents are
used.
Figure 8
Removing the Front Corver
Flow Connections of the Quaternary Pump
"Accessory Kit Contents G1311-68705"
Installing the Pump
on page 31
3
41