Bench Space; Environment - Agilent Technologies 1200 Series Manual

2
Site Requirements and Specifications
Site Requirements

Bench Space

The module dimensions and weight (see
module on almost any laboratory bench. It needs an additional 2.5 cm
(1.0 inches) of space on either side and approximately 8 cm (3.1 inches) in the
rear for the circulation of air and electric connections.
If the bench should carry a complete Agilent 1200 Series system, make sure
that the bench is designed to carry the weight of all the modules.
The module should be operated in a horizontal position!
N O T E

Environment

Your module will work within specifications at ambient temperatures and
relative humidity as described in
Condensation within the module
C A U T I O N
Condensation will damage the system electronics.
➔
➔
24
Do not store, ship or use your module under conditions where temperature
fluctuations could cause condensation within the module.
If your module was shipped in cold weather, leave it in its box and allow it to warm
slowly to room temperature to avoid condensation.
Table 3 on page 25) allow to place the
Table 3 on page 25.
1200 Series Quarternary Pump User Manual